beautypg.com

Basler Electric DGC-2020 User Manual

Page 12

background image

Firmware Package

Version and Date

Change

1.17.00, 01/13

Added French language support.

Increased the number of gates per logic level to 20.

Allow Grounded Delta Override to be effective regardless of configured
generator connection.

Increased the number of logic latches to 10.

Added phase rotation checks and pre-alarms.

Remote speed trim bias adjustable from analog input.

Added speed bias range in units of percent.

Added sequencing status display.

Added Ethernet kW and kvar sharing.

Phase Imbalance (47) disables in single-phase mode.

Improved response during Modbus writes.

Increased available configurable protection parameters.

Added system status display.

Modified breaker reset function so that breakers are only reset if
locked out, sync failed, or failed to open.

Added a setting to breaker fail pre-alarm to be active on transitions
only
or always.

Modified sequencing to operate correctly when units are operating due
to external ATS.

Corrected handling of Combined Code Red Alarm on ECU7/ECU8
engines.

Modified speed raise/lower so no change occurs if both conditions are
true.

Corrected potential settings loss in weak battery and emergency stop
scenarios.

1.15.00, 06/12

Added Russian language support.

Added Auto Breaker Operation Inhibit, Mains Fail Transfer Inhibit, and
Closed Transition Override logic elements.

Added Restart Delay setting.

Added SPN Conversion Method

Increased Max on Weak Battery and Low Battery Pre-alarms. 14 V for
12 V systems and 28 V for 24 V systems.

Added DPF Soot Level Pre-Alarms

Added DEF Fluid Level and Inducement Pre-Alarms

Added Unexpected Shutdown Alarm

Added function which disables the front panel buttons Run, Off, and
Auto when logic elements Run Mode, Off Mode, and Auto Mode are
set true.

Added 4 logic elements which override control of 4 LEDs on the
RDP-110.

1.13.08, 11/11

Made Diesel Particulate Filter Regeneration Request momentary.

Minor firmware improvements.

x

DGC-2020 Introduction

9400200990 Rev X

This manual is related to the following products: