Basler Electric DGC-2020 - Manual (Page 205)

along with File Details are listed. Place a check in the boxes next to the individual files you want to
upload.
Figure 4-78. Basler Electric Device Package Uploader
8. Click on the Upload button and the Proceed with Device Upload screen will appear. Select Yes or
No.
9. After selecting Yes, the DGC-2020 Selection screen will appear. Select the communication port to
begin upload. Firmware updating is only possible locally through the USB port. Refer to Figure
4-79.
Figure 4-79. DGC-2020 Selection
10. The Processing, Please Wait… screen is displayed as file(s) are uploaded. See Figure 4-80.
Figure 4-80. Processing, Please Wait…
11. After file(s) have been uploaded, click the Close button on the Basler Electric Device Package
Uploader screen and disconnect communication to the DGC-2020.
9400200990 Rev X DGC-2020 BESTCOMSPlus
® Software
4-95