Basler Electric DECS-250 Mounting User Manual
Mounting
9440300990 Rev H
107
Mounting
As delivered, the DECS-250 is configured for projection (wall) mounting. Front panel mounting is possible
with an optional escutcheon plate mounting kit (DECS-250 P/N 9440311100).
Mounting Considerations
DECS-250 heat sink orientation necessitates vertical mounting for maximum cooling. Any other mounting
angle will reduce heat dissipation and possibly lead to premature failure of critical components.
The DECS-250 may be mounted anywhere the ambient temperature does not exceed the maximum
operating temperature as listed in the Specifications chapter.
Projection Mounting
Figure 105 illustrates the mounting dimensions for projection (wall) mounting of the DECS-250.
Behind-the-Panel Mounting
Figure 106 shows the front dimensions of the optional escutcheon mounting plate for the DECS-250.
Panel cutting and drilling dimensions for panel mounting are shown in Figure 107.
DECS-250
Mounting