Basler Electric DGC-2020 - Manual (Page 404)

AEM-2020 Inputs and Outputs
Input and output terminals are shown in Figure 11-2 and listed in Table 11-2.
Figure 11-2. Input and Output Terminals
Table 11-2. Input and Output Terminals
Connector Description
P1 Operating Power and CAN bus
P2 RTD Inputs 1 - 4
P3 Analog Inputs 1 - 8 and Analog Outputs 1 - 4
P4 Thermocouple 1 Input
P5 Thermocouple 2 Input
P6 RTD Inputs 5 - 8
11-6 DGC-2020 AEM-2020 (Analog Expansion Module) 9400200990 Rev X