Basler Electric DGC-2020 - Manual (Page 299)

Figure 7-15. Settings Explorer, Programmable Senders, Coolant Temperature Screen
Oil Pressure (Figure 7-16)
1. The oil pressure sender can be configured by selecting one of the sender types that come as a part of
the BESTCOMSPlus
® sender library by clicking on Load Oil Settings File and selecting the
appropriate sender.
2. If no sender file matches the sender being used, the individual points that map resistance points to oil
pressure may be modified by setting numeric values in the table, or dragging the points of the graph
to the desired characteristic. Information on sender characteristics should be obtained from the
sender manufacturer.
3. Select Positive or Negative sender slope as required for the desired sender graph.
4. Click Save Oil Data to save the data in the current settings file.
5. If you want to save newly entered sender data as a sender library file, click Create Oil Settings File
and enter a file name and location to save the file.
6. Click the Send Settings button in BESTCOMSPlus
® to send the sender settings to the DGC-2020.
9400200990 Rev X DGC-2020 Setup 7-11