Basler Electric DGC-2020 - Manual (Page 246)

Name Description Symbol
OR
Input Output
0 0
0
0 1 1
1 0 1
1 1 1
NOR
Input Output
0 0
1
0 1 0
1 0 0
1 1 0
XOR
Input Output
0 0
0
0 1 1
1 0 1
1 1 0
XNOR
Input Output
0 0
1
0 1 0
1 0 0
1 1 1
NOT
(INVERTER)
Input Output
0 1
1 0
Pickup and Dropout Timers
Drop Out
Timer Used to set a delay in the logic.
For more information, refer to Programming BESTlogicPlus, Pickup and
Dropout Timers, later in this section.
Pickup Up
Timer Used to set a delay in the logic.
For more information, refer to Programming BESTlogicPlus, Pickup and
Dropout Timers, later in this section.
Latches
Reset Priority
Latch When the Set input is on and the Reset input is off, the latch will go to
the SET (ON) state. When the Reset input is on and the Set input is off,
the latch will go to the RESET (OFF) state. If both the Set and Reset
inputs are on at the same time, a reset priority latch will go to the
RESET (OFF) state.
Set Priority
Latch When the Set input is on and the Reset input is off, the latch will go to
the SET (ON) state. When the Reset input is on and the Set input is off,
the latch will go to the RESET (OFF) state. If both the Set and Reset
inputs are on at the same time, a set priority latch will go to the SET
(ON) state.
5-18 DGC-2020 BESTlogic ™ Plus Programmable Logic 9400200990 Rev X