Basler Electric DGC-2020 - Manual (Page 153)

Remote LSM Inputs
An optional LSM-2020 (Load Share Module) provides one configurable A analog input that can be used as
a setpoint source for var, PF, or kW control. Settings are provided for min and max input voltage B , and
min and max input current C . Refer to Bias Control Settings in this section for information selecting the
LSM-2020 input as a setpoint source.
The remote LSM inputs are incorporated into a BESTlogicPlus programmable logic scheme by selecting
them from the I/O group in BESTlogicPlus. For more details, refer to Section 5, BESTlogicPlus
Programmable Logic.
The BESTCOMSPlus Remote LSM Inputs screen is illustrated in Figure 4-37.
Figure 4-36. Remote LSM Inputs
A Input Type: Voltage or Current.
B Min/Max Input Voltage: Adjustable from 0 to 10 V in 0.1 V increments.
C Min/Max Input Current: Adjustable from 4 to 20 mA in 0.1 mA increments.
Remote Contact Inputs
An optional CEM-2020 (Contact Expansion Module) provides 10 contact inputs. Each of the 10 contact
inputs can be independently configured to annunciate an alarm or pre-alarm
A when the input senses a
contact closure. A user-adjustable time delay B can be set to delay recognition of a contact input. By
default, all inputs are configured so that they do not trigger an alarm or pre-alarm.
To make identifying the contact inputs easier, a user-assigned name C can be given to each input.
Contacts can be recognized D always or only while the engine is running.
The remote contact inputs are incorporated into a BESTlogicPlus programmable logic scheme by
selecting them from the I/O group in BESTlogicPlus. For more details, refer to Section 5, BESTlogicPlus
Programmable Logic.
Remote contact input status is available in BESTlogicPlus Programmable Logic when “None” is selected
for Alarm Configuration.
The BESTCOMSPlus Remote Contact Inputs screen is illustrated in Figure 4-37.
9400200990 Rev X DGC-2020 BESTCOMSPlus
® Software
4-43