Mtu -110, Figure 4-107. metering, download dtc -110, Figure 4-108. metering, mtu alarms -110 – Basler Electric DGC-2020 User Manual
Page 220: Figure 4-109. metering, mtu fault codes -110
Figure 4-107. Metering, Download DTC
MTU
The MTU reports operating information to the DGC-2020 through the CANBus interface when the ECU is
configured for MTU. Operating parameters and diagnostic information, if supported by the MTU, are
decoded and displayed on these screens.
MTU Alarms
MTU fault codes are displayed in a scrolling window. MTU Alarms and MTU Pre-Alarms are also reported
on this screen. The status is TRUE when the corresponding LED is red. Refer to Figure 4-108.
Figure 4-108. Metering, MTU Alarms
MTU Fault Codes
MTU Fault Codes can be viewed and downloaded on this screen. Refer to Figure 4-109.
Figure 4-109. Metering, MTU Fault Codes
4-110
DGC-2020 BESTCOMSPlus
® Software
9400200990 Rev X
This manual is related to the following products: