Basler Electric DGC-2020 - Manual (Page 241)

Name Description Symbol
DEF Inducement This is the lowest level of inducement not to operate
the engine when Diesel Exhaust Fluid (DEF) is low
or of poor quality or there is a problem with the
Exhaust After Treatment System (EATS). The engine
is operating in a reduced power mode. Eventually the
level of inducement will be increased unless the
problem with the DEF or malfunction in the EATS is
corrected.
DEF Inducement
Override This pre-alarm indicates a temporary override of
inducement not to operation the engine. This is set
by the ECU and is not a user setting.
DEF Low Severe True when the engine ECU reports via CAN bus that
Diesel Exhaust Fluid (DEF) is at a level below 8%.
DEF Pre-severe
Inducement This pre-alarm indicates a high level of inducement
not to operate the engine due to low or poor quality
Diesel Exhaust Fluid (DEF), or a malfunction in the
Exhaust After Treatment System (EATS). The engine
may operate in a reduced power mode, or for a
limited time, after which it will enter a state of severe
inducement unless the problem with the DEF or
malfunction in the EATS is corrected.
DEF Severe
Inducement This pre-alarm indicates the highest level of
inducement not to operate the engine due to low or
poor quality Diesel Exhaust Fluid (DEF), or a
malfunction in the Exhaust After Treatment System
(EATS). The engine may operate in a reduced power
mode, or for a limited time, or may be prevented from
starting by the ECU until the problem is corrected. A
service tool may be required to restart the engine.
Diag Trouble
Code True when a Diagnostic Trouble Code exists.
DPF Regenerate
Disabled True when the Diesel Particulate Filter (DPF) lamp
status broadcast over CAN bus indicates that DPF
regeneration is inhibited.
DPF Regenerate
Required True when the Diesel Particulate Filter (DPF) lamp
status broadcast over CAN bus indicates that DPF
regeneration is required.
DPF Soot Level
High True when the engine ECU reports via CAN bus that
Diesel Particulate Filter (DPF) soot level is high.
DPF Soot Level
Moderately High True when Diesel Particulate Filter (DPF) lamp
status (yellow warning) broadcast over CAN bus
indicates that the soot level is moderately high.
DPF Soot Level
Severely High True when Diesel Particulate Filter (DPF) lamp
status (red warning) broadcast over CAN bus
indicates that the soot level is severely high.
ECU Comm Loss True when communication to ECU has been lost.
Engine kW Over
Load 1 True when the Engine kW Overload 1 Pre-Alarm
settings have been exceeded.
Engine kW Over
Load 2 True when the Engine kW Overload 2 Pre-Alarm
settings have been exceeded.
9400200990 Rev X DGC-2020 BESTlogic ™ Plus Programmable Logic 5-13