Apple Logic Pro 7 - Manual (Page 673)

Chapter 22 Control Surface Support 673
Assignment Parameters
The following section explains all parameters that can be edited in the Controller
Assignments window.
Control Name
Name of the control (Fader 1, for example). This is Learned by default for assignments
created with the Learn function (see above) from supported control surfaces. This
name is for informational purposes only and has no influence on functionality.
Label
Text displayed on control surfaces that feature a display and are supported by a plug-
in. A @ character starts an escape sequence which acts as a placeholder for dynamically
generated text. The escape sequence consists of three characters: @ and two
additional characters:
First Character:
Second Character:
Example: “Send@s#” shows “Send1”, “Send2” and so on.
Character Meaning
t Track
r Surround
s Send slot
S All Sends
e EQ band
E all EQs
p Plug-in Insert slot
i Instrument
Character Meaning
# Number of above (track number, Send slot, EQ band, Plug-in slot)
n Name of above
p Name of parameter addressed by the assignment
P Name of first parameter
o Parameter offset, counted from 1
O Maximum parameter offset, counted from 1
b Parameter bank (= parameter offset/bank size), counted from 1
B total number of banks (= parameter offset/bank size), counted from 1