Apple Logic Pro 7 - Manual (Page 270)

270 Chapter 6 Logic’s Mixing Facilities
• Input: Click-hold on any selected channel’s Input slot, and make your selection from
the list. All selected channels will receive their signal from the chosen input(s).
• Output: Click-hold on any selected channel’s Output slot, and make your selection
from the list. All selected channels will be routed to the chosen output (pair).
• Automation Mode: Click-hold any selected channel’s Automation mode pop-up
menu, and make your selection from the list. All selected channels will be switched
to the chosen Automation mode.
• Group Assignment: Click-hold any selected channel’s Group display, and make your
selection from the list. All selected channels will be assigned to the chosen Group.
Important: You can only perform the multi-channel Send and Insert options if no active
Send or Insert is in the same slot on any selected channel. In other words, ensure that
all selected channels have an unused Send 3, or Insert slot 4, for example, before using
this facility.
Note: Clicking a fader or knob while holding Option resets the value to a neutral
value: Option-clicking a volume fader sets it to 0 dB (90, if the Value As menu in the
Object Parameter box is set to the Num option), Option-clicking a pan pot sets it to the
center position, Option-clicking a send pot sets it to 0 dB (90).
Elements of the Audio Object
Here is an overview of all Audio Object elements. The list shows what elements are
available in the different types of Audio Objects.