Apple Logic Pro 7 - Manual (Page 591)

Chapter 17 The Transform Window 591
Subposition
Time position of the event, within a bar.
Conditions
The middle section of the window (Conditions) defines the conditions that determine
which events are selected for edit operations. Each column represents a different MIDI
event parameter.
The condition is considered to be fulfilled when an event matches the defined effective
range of all event parameters. These ranges are determined in the pull-down menus
found under each of the event parameter columns (except the Status column). The
possible value conditions are listed below.
The All setting in the top box means that all values fulfil the conditions, making all
other boxes in the same column superfluous.
Conditions for the Status
You have a choice of just two settings here, All (means all event types fulfil the
condition) and “=”. Clicking in the box below opens a pull-down menu, where you can
select; note, poly pressure, control change, program change, channel pressure, or pitch
bend.
Conditions for the values of Position, Cha, -1-/Pitch, -2-/Vel, Length, and
Subposition
You can assign one of the following value conditions for each of the parameters
(except the status):
“=“
The value in the event and the box below it must be equal, for the condition to be
fulfilled.
Unequal
The value in the event and the box below it must be unequal, for the condition to be
fulfilled.
smaller
The value in the event must be smaller than the value in the box below it, for the
condition to be fulfilled.
larger
The value in the event must be larger than the value in the box below it, for the
condition to be fulfilled.
Inside
The value in the event must be within the value range of both boxes below it, for the
condition to be fulfilled.