Festo Кабели и принадлежности - Manual (Page 71)

2. Fitting
2−15
Festo P.BE−SPC200−EN en 0901d
Proceed with fitting as follows:
1. Push the control panel into the cut−out in the front plate.
2. Hang the fastening clamps from the rear into the
appropriate cut−outs.
3. Screw the control panel to the front plate.
1
Control panel
2
Front plate
3
Fastening clamps
4
Fastening screws
1.
2. 3.
1
2
3
4
Fig. 2/7: Fitting control panel type SPC200−MMI−1F