Festo Кабели и принадлежности User Manual
Page 425
A. Notes on installing the pneumatic components
A−33
Festo P.BE−SPC200−EN en 0901d
Please note
The piston rod of the DNCI is flat on both sides ć the
double piston rod. The incremental magnetic measuring
tape is integrated into the piston rod on one side. Do not
damage this side of the piston rod; the measuring tape
could be damaged and thus falsify the measuring signal.
This can disable the function of the measuring system.
The double piston rod is used exclusively to secure the
measurement system against rotation; it is not suitable for
absorbing external moments. Further information on operĆ
ating and connecting the DNCI can be found in the operatĆ
ing instructions for the DNCI.
Please note
The function of measuring system in the DNCI is based on
magnetism. Excessively strong magnetic fields in the area
of the sensor head can hinder the measuring function or
falsify the measurement results.
Be sure to observe the mounting conditions described in
the operating instructions.