Festo Кабели и принадлежности - Manual (Page 343)

7. Description of the commands
7−77
Festo P.BE−SPC200−EN en 0901d
M38 Load actual value
ć permitted in operating modes: Start/Stop
Nn M38 @ X [Y, Z, U]
n Register number n = 0 ... 99
Effect The current position is loaded into the specified position register
Example N003 G00 G91 X100
N004 M38 @1 X
N005 G29 @0 X@1
N006 G00 G90 X@0
;Move relatively 100 mm further
;Load current position into position register 1
;of the X−axis
;Form the sum of the two position registers 0
;and 1, save result in position register 0
;Move to position in register 0