Festo Кабели и принадлежности - Manual (Page 206)

5. Controlling the SPC200
5−20
Festo P.BE−SPC200−EN en 0901d
NC record numbers
The desired NC record number, in which the positioning task
is stored, is specified binary−coded via inputs. The following
NC records can therefore be accessed:
Type of control Accessible
NC record numbers
I/O module (5 inputs; 2 5 = 32) 0...31
Field bus module (10 inputs) 0 ... 999 1)
1) Maximum permitted number of NC records
The NC records are always stored in the SPC200 beginning
with NC record 0 and a step size of 1. If possible, use the
same numbering in WinPISA, e.g. with the aid of the numberĆ
ing function.