Festo Кабели и принадлежности - Manual (Page 411)

A. Notes on installing the pneumatic components
A−19
Festo P.BE−SPC200−E N en 0901d
Valve−drive combinations with DNCM−...
Recommendation: Use only suitable valve−drive combinaĆ
tions. The following diagram shows valve−drive combinations
for type DNCM−... .
1
Proportional
directional
control valve type
MPYE−5−...−010B
2
Drive diameter
3
Stroke length of
the drive
1
2
3 100 200 400 300 500
32
50
MPYE−5−1/8LF−010B
MPYE−5−M5−010B
L [mm]
∅
[mm
]
MPYE−5−1/8HF−010B
Fig. A/14: Suitable valve−drive combinations with DNCM−...
The limits related to stroke length and valve types are to be
regarded as flowing. If you wish for a system with higher dyĆ
namics, you should use the valve with the higher flow in the
limit range. If you attach great importance to control accuĆ
racy, you should use the valve with the lower flow, providing
this fulfills your requirements as regards the dynamics.