Festo Кабели и принадлежности - Manual (Page 403)

A. Notes on installing the pneumatic components
A−11
Festo P.BE−SPC200−EN en 0901d
An operating system as from version 4.6 is required for
operating this drive.
Please note
The following DNC variants are
not permitted for use with
the SPC200:
Ĉ constant run variant S10 (slow speed)
Ĉ light run variant S11 (low friction)
Ĉ temperature−resistant variant S6 (only on demand).
Use only:
ć DNC drives with permitted maximum piston speed
V
max
> 1 m/s.
ć permitted valve−drive combinations.