Festo Кабели и принадлежности - Manual (Page 70)

2. Fitting
2−14
Festo P.BE−SPC200−EN en 0901d
Control panel type SPC200−MMI−1F
Control panel type SPC200−MMI−1F is intended for mounting
in a front plate. For fastening the control panel you require a
space of approx. 114 x 102 x 70 mm and a cut−out area of
approx. 92 x 92 mm. The front plate must not be thicker than
4 mm.
1
Display
(LCD display with
2 x 16 characters)
2
Fastening clamps
1
2
Fig. 2/5: Control panel type SPC200−MMI−1F
The following diagram shows appropriate dimensions.
1 2 3
1
Control panel (side view)
2
Control panel (rear view)
3
Fastening clamps (included in delivery)
Fig. 2/6: Dimensions of type SPC200−MMI−1F