Festo Кабели и принадлежности - Manual (Page 316)

7. Description of the commands
7−50
Festo P.BE−SPC200−EN en 0901d
Example 6 Linked further switching condition with correctly used comĆ
mand M37
N010 M37 X50 ;50% of the workpiece mass
N011 G25 X20 ;switch to next record after 20% of
;traversing distance
N012 G01 X400 FX20 ;position 400 with 20% of the config. speed
;and 50% of workpiece mass
N013 #SQ0.0 ;Set ouput Q0.0
N014 M37 X0 ;100% of the workpiece mass
N015 G01 X400 Fx50 ;Finish traversing task from N012 with
;50% of the config. speed Speed:
;and 50% of the workpiece mass.
;The new mass from N014 is not
;yet effective here!
N016 ...
N017 G00 X10 ;Position 10 with 100% workpiece mass
N...