Festo Кабели и принадлежности - Manual (Page 29)

1. Summary of components
1−5
Festo P.BE−SPC200−EN en 0901d
1.1.1 The range of devices for the SPC200
The range of devices for the SPC 200 includes the following
components:
Components Function
SPC200
type SPC200−...−... The SPC200 is housed in a rack. DependĆ
ing on the requirement of the positioning
task you can install the necessary compoĆ
nents in the rack.
Control panel
type SPC200−MMI−1... The control panel has six buttons with
which all functions can be accessed by
menu.
Control panel type SPC200−MMI−1 can be
placed directly on the SPC200.
Control panel type SPC200−MMI−1F is
intended for mounting in a front plate.
Axis interface
type SPC−AIF−... The axis interface provides the connection
between the components on the pneuĆ
matic axis and the SPC200. It receives the
values supplied by the measuring system,
passes them onto the SPC200 and proĆ
vides the positioning signal for the proĆ
portional directional control valve.
I/O function module
(optional) type
SPC−FIO−2E/2A−M8 This module provides 2 inputs/outputs for
connecting sensors and actuators directly
on the axis. Additional functions, such as
e.g. gripping, lifting, lowering and turning
can be implemented with these sensors
and actuators.