Festo Кабели и принадлежности - Manual (Page 400)

A. Notes on installing the pneumatic components
A−8
Festo P.BE−SPC200−EN en 0901d
Tubing with slide and yoke operation with the
DGP(I)(L)−...
The DGP(I)(L)−... is suitable both for slide and yoke mode.
When compressed air is applied to port 4 of the proportional
directional control valve, the slide must move in the direction
of the measuring system zero point (electrical connection of
the potentiometer). If compressed air is applied to port 2, the
slide must move away from the measuring system zero point.
1
Electrical
connection
1
2 4
Fig. A/5: Tubing for the slide mode
1
Electrical
connection
1
2 4
Fig. A/6: Tubing connection for yoke mode with measuring system