Festo Кабели и принадлежности - Manual (Page 30)

1. Summary of components
1−6
Festo P.BE−SPC200−EN en 0901d
If required, the following CP I/O modules and CPV valve
terminals can be connected to the end of the axis interface
string.
CP modules
(optional) Function
CPV valve terminals
type CPV...−...−... Provides via valve plates different valve
functions for controlling pneumatic
actuators. Relay plates, pressure zone
separation plates and blanking plates can
also be fitted.
Input module
type CP−E16...−M... Special designs are available for various
connection variants. Provide inputs for
connecting sensors and enable e.g.
cylinder positions to be scanned.
Output module
type CP−A08−M12 Provide universally useable electric
outputs for controlling low−current
consuming devices (valves, bulbs etc.).