Festo Кабели и принадлежности - Manual (Page 224)

6. Operating the SPC200 with the control panel
6−12
Festo P.BE−SPC200−EN en 0901d
Proceed as follows when selecting a menu command or
parameter:
1. Press the Esc button as often as necessary until the basic
setting is shown. The first line of the display will then
show the text SPC200 followed by the version number of
the operating system.
2. Press the button { or }Ăas often as necessary until
the desired menu appears in the bottom line.
3. Press the Enter button. The menu will then be opened
and the first parameter or the first operating function of
the menu will be shown.
4. If an axis identifier is offered for selection, select it with
the buttons vV and then press the Enter button.
5. If a parameter or an operating function is shown, you can
scroll through the menu with the buttons { or } until
the desired parameter or the desired command is shown
in the bottom line.
6. Press the Enter button in order to select the command or
parameter.
The following sections show you how to make the settings,
how to carry out the programming or how to trigger operating
functions.