Festo Кабели и принадлежности - Manual (Page 137)

3. Installation
3−59
Festo P.BE−SPC200−EN en 0901d
Connecting the measuring system
The axis interface has been designed for one of the following
measuring systems:
Axis interface Measuring system type
SPC−AIF−POT Analogue system
Linear potentiometer type MLO−POT−...−TLF or
integrated systems (e.g. type DNCM−...)
SPC−AIF−POT−LWG Analogue system
Linear potentiometer type MLO−POT−...−LWG or
integrated systems (e.g. type DSMI−...)
SPC−AIF−MTS Digital system
Temposonic type MME−MTS−...−TLF−AIF or inteĆ
grated system (e.g. type DGPI(L)−...−...−...−AIF)
SPC−AIF−INC Incremental system
Integrated measuring system
(e.g. type DNCI−...)
In the axis interface types SPC−AIF−POT and SPC−AIF−MTS, the
measuring system cable is permanently connected with the
axis interface. It has a fixed length of approx. 0.30 m.
The axis interface type SPC−AIF−INC has an 8−pin M12 plug for
the sensor connection.
Please note
Use only the original cable. Do not extend the cable. InterĆ
ference due to electromagnetic influences can be avoided
if a short cable is used.
New feature
from
BS 4.82