Festo Кабели и принадлежности - Manual (Page 44)

1. Summary of components
1−20
Festo P.BE−SPC200−EN en 0901d
1.3 Structure of the axis interface string
The SPC200 is intended for fitting into a control cabinet. The
connection to the measuring system and the proportional
directional control valve is made via the axis interface which
is connected to the SPC200 via the axis interface string.
In its basic design, the SPC200 can take control of the posiĆ
tioning of two pneumatic axes. Two axis interfaces and two
pneumatic axes can therefore be connected to the axis interĆ
face string. The axis interface for the second axis is conĆ
nected here to the axis interface of the first axis.
Axis identifiers The axis identifiers are assigned to the axes automatically.
The first axis is addresses as the X−axis; the second axis as
the Y−axis.
1
Axis interface of
the X−axis
2
Axis interface of
the Y−axis
3
Axis interface
string
POWER
ERROR
OUT VALVE IN
POWER
ERROR
OUT VALVE IN
1
2
3
3
Fig. 1/7: Assignment of axis identifiers (example 1)