4 edit existing program, Edit existing program – Festo Кабели и принадлежности User Manual
Page 251
6. Operating the SPC200 with the control panel
6−39
Festo P.BE−SPC200−EN en 0901d
6.3.4
Edit existing program
1. Press the button
{ or }ćas often as required in the
basic setting until the menu EDIT PROGRAM is displayed.
SPC200 READY
EDIT PROGRAM >>
2. Press the Enter button in order to open the menu EDIT
PROGRAM. The first command (New program) will then be
displayed in the bottom line.
EDIT PROGRAM
NEW PROGRAM >>
3. Select the command MODIFY PROGRAM with the buttons
{ or }.
EDIT PROGRAM
MODIFY PROGRAM>>
4. Press the Enter button in order to select the menu
MODIFY PROGRAM.
MODIFY PROGRAM
PROGRAM NO.: 00?
5. Use the cursor buttons to set the desired program
number, e.g. program no. 03:
NEW PROGRAM
PROGRAM NO.: 03?
6. Press the Enter button in order to edit the program.