Festo Кабели и принадлежности - Manual (Page 469)

C. Technical appendix
C−23
Festo P.BE−SPC200−EN en 0901d
Type SPC200−PWR−AIF
Temperature range
Ĉ Operation
Ĉ Storage/transport
− 5 ... + 50 °C
− 20 ... + 70 °C
Weight 82 g
Relative humidity 95 %, non−condensing
Operating voltage at pin 1 (load voltage)
Ĉ Rated value
Ĉ Tolerance
1)
Ĉ Residual ripple
Ĉ Current consumption (SPC200−CPU−4 and
SPC200−CPU−6)
24 V DC
−5 ... +25 % (22.8...30.0 V DC)
2 %
500 mA + 1.2 A per pneumatic axis
Operating voltage at pin 2 (internal electronics)
Ĉ Rated value
Ĉ Tolerance
Ĉ Residual ripple
Ĉ Power failure bridging time
Current consumption with:
Ĉ SPC200−CPU−4
Ĉ SPC200−CPU−6
24 V DC
−5 ... +25 % (22.8...30.0 V DC)
2%
10 ms
400 mA + current requirement of the components
connected to the sensor supply
2) + sum of curĆ
rent consumption on the AIF string 3)
600 mA + current requirement of the components
connected to the sensor supply
2) + sum of curĆ
rent consumption on the AIF string 3)
CE symbol (declaration of conformity)
è
www.festo.com
In accordance with EU EMC Directive
Vibration and shock
Ĉ Vibration
Ĉ Shock
Tested as per DIN/IEC 68 part 2−6:
0.15 mm path at 10...58 Hz;
2 g acceleration at 58...150 Hz
Tested as per DIN/IEC 68 part 2−27:
± 30 g at 11 ms duration; 5 shocks per direction
1) Observe the tolerance of the modules connected to the axis interface string.
2) Maximum 0.5 A be made available for each I/O module type SPC200−DIO.
3) See technical specifications of the connected modules.
The component is intended for industrial use.