Festo Кабели и принадлежности User Manual
Page 428
A. Notes on installing the pneumatic components
A−36
Festo P.BE−SPC200−EN en 0901d
Recommendation: Use the following fastening elements from
Festo:
Fastening element
Type
Base fastening
HNC−...
Flange fastening
FNC−...
·
Use a suitable guide for absorbing lateral forces and
external torques.
Recommendation: If necessary, use standard cylinder type
DNCI from Festo in the variant with built−on guide unit type
FENG.
The cylinder, guide, measuring system and load must be rigid
in the direction of movement, have little play and must be
connected flush with each other.
In positioning applications, use only the following elements
approved by Festo for coupling the mass load to the drive:
Connecting element
Type
Articulated head
SGS−...
Swivel journal kit
ZNCM−...
Bearing block
LNZG−...
·
Check the play of the coupling.
The following applies here: Coupling play
Ţ 0.05 mm