Festo Кабели и принадлежности - Manual (Page 12)

Contents and general instructions
X
Festo P.BE−SPC200−EN en 0901d
Designated use
The SPC200 Smart Positioning Controller is designed for fitĆ
ting into a control cabinet. It serves as a closed−loop positionĆ
ing controller for pneumatic axes and as a positioning conĆ
troller for stepping motor axes. Basic components and
modules for the SPC200 are described in this documentaĆ
tion. Special extension modules are described in separate
manuals.
It is absolutely necessary to observe the safety instructions
as well as the designated use of the relevant components and
modules. Observe also the safety regulations listed in the
operating instructions for the pneumatic and electric compoĆ
nents used.
The SPC200 and the modules and cables to be connected are
only to be used as follows:
ć in accordance with designated use
ć only in industrial applications
ć without any modifications by the user. Only the converĆ
sions or modifications described in the documentation
supplied with the product are permitted.
ć in faultless technical condition.
If additional commercially−available components such as senĆ
sors and actuators are connected, the specified limits for
pressures, temperatures, electrical data, torques, etc. must
not be exceeded.
Please observe the standards specified in the relevant
chapters and comply with technical regulations, as well as
with national and local regulations.