Festo Кабели и принадлежности - Manual (Page 52)

1. Summary of components
1−28
Festo P.BE−SPC200−EN en 0901d
Control panel Control panel type SPC200−MMI−1... has a two−line LCD disĆ
play. Up to 16 characters per line can be represented. The
control panel has six buttons with which all functions can be
accessed by menu.
Control panel type SPC200−MMI−1 can be placed directly on
the SPC200. Control panel type SPC200−MMI−1F is intended
for mounting in a front plate.
1
2
3
1
Display (LCD display with 2 x 16 characters)
2
Touch−sensitive keyboard
3
Interface to the SPC200 on the rear
Fig. 1/10: Control panel type SPC200−MMI−1
The control panel offers all the necessary functions for comĆ
missioning, programming, diagnosing and operating directly
on the SPC200. The control panel provides editor functions
for editing position registers and programs.
You can enter positions or programs via menus on the keyĆ
board. If your positioning system is built−up completely, you
can move to positions very easily and transfer them to the
position register with the Teach functions.