Festo Кабели и принадлежности - Manual (Page 47)

1. Summary of components
1−23
Festo P.BE−SPC200−EN en 0901d
If required, the I/O function module 6 or the module with
outputs 4 is connected to the Out connection of axis interĆ
face 2 or 3. Modules with outputs 4 possess a connection
for coupling an input module 5.
Input modules can also be connected directly to the axis
interface.
The individual modules are connected to each other by
cables. Information is transmitted between the modules and
the SPC200 via this cable. The operating voltage and the load
voltage are also provided via this cable. Identification of all
connected modules is carried out automatically by the
SPC200.