Festo Кабели и принадлежности - Manual (Page 33)

1. Summary of components
1−9
Festo P.BE−SPC200−EN en 0901d
1.1.2 Structure of the SPC200
The SPC200 is built up on a modular basis and is housed in a
rack. The host computer and memory of the SPC200 are situĆ
ated on the rear wall printed circuit board in the rack.
The combination of rack and rear wall printed circuit board is
referred to as the basic unit. Basic units with 4 and 6 locaĆ
tions are available for implementing variants with different
equipment.
1
2
3
1
Rack (basic unit)
2
Rear wall printed circuit board (in the rack)
3
Modules
Fig. 1/1: SPC200 Smart Positioning Controller
Depending on the requirement of the positioning task, you
can install the necessary components in the basic unit.