Festo Кабели и принадлежности - Manual (Page 216)

6. Operating the SPC200 with the control panel
6−4
Festo P.BE−SPC200−EN en 0901d
6.1 Structure and functions of the control panel
Control panel type SPC200−MMI−1... enables you to carry out
commissioning, programming and diagnosis directly on the
SPC200. It offers a simple menu structure and a uniform keyĆ
board assignment.
Warning
Faults may occur if control and operating functions are
accessed at the same time by WinPISA and the control
panel.
Make sure that WinPISA and the control panel are not
used at the same time.
The following diagram shows the elements on the control
panel.
1
Two−line LCD
displays
2
Buttons
Enter Esc
1
2
Fig. 6/1: Elements of the control panel
The two−line LCD display shows all texts in English. Up to
16Ăcharacters can be represented on each line. The touch−
sensitive keyboard has six buttons. With these buttons you
can carry out all operating functions and settings as indicated
in the menu.