Festo Кабели и принадлежности - Manual (Page 426)

A. Notes on installing the pneumatic components
A−34
Festo P.BE−SPC200−EN en 0901d
Valve−drive combinations with DNCI−...
Recommendation: Use only suitable valve−drive combinaĆ
tions, see the following illustration.
1
Proportional
directional
control valve type
MPYE−5−...−010B
2
Drive diameter
3
Stroke length of
the drive
1
2
3 50 150 250 450 650 750 350 550
32
40
50
63
MPYE−5−1/8HF−010B
MPYE−5−1/8LF−010B
MPYE−5−1/4−010B
L [mm]
∅
[mm]
MPYE−5−M5−010B
Fig. A/24: Suitable valve−drive combinations with DNCI−...
The limits related to stroke length and valve types are to be
regarded as flowing. If you wish for a system with higher dyĆ
namics, you should use the valve with the higher flow in the
limit range. If you attach great importance to control accuĆ
racy, you should use the valve with the lower flow, providing
this fulfills your requirements as regards the dynamics.