Festo Кабели и принадлежности - Manual (Page 20)

Contents and general instructions
XVIII
Festo P.BE−SPC200−EN en 0901d
Identification of version−specific information
Passages in the text containing special information about
particular operating system versions are identified as folĆ
lows:
New feature:
Note that the the function marked is new as from the speciĆ
fied operating system version (in the example
4.63) and is
not supported by the older operating system versions.
Compatibility violation:
Note that as from the specified operating system version (in
the example
4.63), the function marked is not compatible
with the older versions. The explanations in the text must be
observed.
Overview of operating system versions
The following table provides an overview of the changes in
the operating system (firmware) of the SPC200:
Version Identification What has been changed See section
up to 3.8 ć Ĉ WinPISA version 4.1a is recommended for
this version.
Ĉ Supports drives of the DGP family and
stepping motors of the MTR−VRDM family.
Ĉ With regard to system functionality, this
version is the reference for all newer verĆ
sions.
ć
New feature
as from
OS 4.63
Non−compatible
as from
OS 4.63