Festo Кабели и принадлежности User Manual
Page 66
2. Fitting
2−10
Festo P.BE−SPC200−EN en 0901d
Fitting with a hat rail
In order to fit the rack onto a hat rail, you will require mountĆ
ing kit CPV10/14−VI−BG−NRH. This kit consists of 2 brackets,
4ĂM4x10 screws and 2 clamping elements with spring (see
Fig. 2/3).
Proceed as follows when fitting the SPC200 onto a hat rail:
1. Make sure that the mounting surface can support the
weight of the SPC200.
2. Fit a hat rail (support rail EN 50022 ć 35x7.5;
width 35Ămm, height 7.5 mm).
3. Fasten the hat rail at least every 100 mm to the fastening
surface.
4. Screw the two brackets
2 with the M4x10 screws supĆ
plied
1 to the fastening bracket of the rack (see followĆ
ing diagram). Make sure that the fixing bolts
5 of the
bracket grip into the groove of the rack.
5. Hang the rack onto the hat rail. Fasten the rack with the
clamping elements
4 so that it cannot tilt or slide down.