NXP Semiconductors LPC24XX UM10237 - Manual (Page 393)

UM10237_4 © NXP B.V. 2009. All rights reserved.
User manual Rev. 04 — 26 August 2009 393 of 792
NXP Semiconductors
UM10237
Chapter 14: LPC24XX USB Host controller
[1] The R/W column in Table 14–360 lists the accessibility of the register:
a) Registers marked ‘R’ for access will return their current value when read.
b) Registers marked ‘R/W’ allow both read and write.
3.2.2 USB Host Register Definitions
Refer to the OHCI specification document for register definitions.
HcRhStatus 0xFFE0 C050 R/W This register is divided into two parts. The lower D-word
represents the hub status field and the upper word
represents the hub status change field. 0x0
HcRhPortStatus[1] 0xFFE0 C054 R/W Controls and reports the port events on a per-port basis. 0x0
HcRhPortStatus[2] 0xFFE0 C058 R/W Controls and reports the port events on a per port basis. 0x0
Module_ID/Ver_Rev_ID 0xFFE0 C0FC R IP number, where yy (0x00) is unique version number
and zz (0x00) is a unique revision number. 0x3505yyzz
Table 360. USB Host register address definitions …continued
Name Address R/W [1] Function Reset value