NXP Semiconductors LPC24XX UM10237 - Manual (Page 182)

UM10237_4 © NXP B.V. 2009. All rights reserved.
User manual Rev. 04 — 26 August 2009 182 of 792
NXP Semiconductors
UM10237
Chapter 9: LPC24XX Pin connect
5.5 Pin Function Select Register 4 (PINSEL4 - 0xE002 C010)
The PINSEL4 register controls the functions of the pins as per the settings listed in
Table 9–134 . The direction control bit in the FIO2DIR register is effective only when the
GPIO function is selected for a pin. For other functions, direction is controlled
automatically.
The bit functions in this register depend on the number of pins of each LPC2400 part. For
the 180-pin LPC2458, see
Table 9–134 . For the 208-pin LPC2460/68/70/78, see
Table 9–135 . LCD functions are available in LPC2470/78 only and are selected in
Table 9–145 .
Table 133. Pin function select register 3 (PINSEL3 - address 0xE002 C00C) bit description
PINSEL3 Pin
name
Function when
00 Function when
01 Function
when 10 Function
when 11 Reset
value
1:0 P1[16] GPIO Port 1.16 ENET_MDC Reserved Reserved 00
3:2 P1[17] GPIO Port 1.17 ENET_MDIO Reserved Reserved 00
5:4 P1[18] GPIO Port 1.18 USB_UP_LED1 PWM1[1] CAP1[0] 00
7:6 P1[19] GPIO Port 1.19 USB_TX_E1 USB_PPWR1 CAP1[1] 00
9:8 P1[20] GPIO Port 1.20 USB_TX_DP1/
LCDVD[6]/
LCDVD[10] PWM1[2] SCK0 00
11:10 P1[21] GPIO Port 1.21 USB_TX_DM1/
LCDVD[7]/
LCDVD[11] PWM1[3] SSEL0 00
13:12 P1[22] GPIO Port 1.22 USB_RCV1/
LCDVD[8]/
LCDVD[12] USB_PW1 MAT1[0] 00
15:14 P1[23] GPIO Port 1.23 USB_RX_DP1/
LCDVD[9]/
LCDVD[13] PWM1[4] MISO0 00
17:16 P1[24] GPIO Port 1.24 USB_RX_DM1/
LCDVD[10]/
LCDVD[14] PWM1[5] MOSI0 00
19:18 P1[25] GPIO Port 1.25 USB_LS1/
LCDVD[11]/
LCDVD[15] USB_HSTEN1 MAT1[1] 00
21:20 P1[26] GPIO Port 1.26 USB_SSPND1/
LCDVD[12]/
LCDVD[20] PWM1[6] CAP0[0] 00
23:22 P1[27] GPIO Port 1.27 USB_INT1/
LCDVD[13]/
LCDVD[21] USB_OVRCR1 CAP0[1] 00
25:24 P1[28] GPIO Port 1.28 USB_SCL1/
LCDVD[14]/
LCDVD[22] PCAP1[0] MAT0[0] 00
27:26 P1[29] GPIO Port 1.29 USB_SDA1/
LCDVD[15]/
LCDVD[23] PCAP1[1] MAT0[1] 00
29:28 P1[30] GPIO Port 1.30 USB_PWRD2 V
BUS
AD0[4] 00
31:30 P1[31] GPIO Port 1.31 USB_OVRCR2 SCK1 AD0[5] 00