NXP Semiconductors LPC24XX UM10237 - Manual (Page 159)

UM10237_4 © NXP B.V. 2009. All rights reserved.
User manual Rev. 04 — 26 August 2009 159 of 792
NXP Semiconductors
UM10237
Chapter 8: LPC24XX Pin configuration
P0[4]/I2SRX_CLK/
LCDVD[0]/RD2/
CAP2[0] 168 [1] B12 [1] I/O P0[4] — General purpose digital input/output pin.
I/O I2SRX_CLK — I 2 S Receive clock. It is driven by the master and received
by the slave. Corresponds to the signal SCK in the I 2 S-bus
specification. [15]
O LCDVD[0] — LCD data. [15]
I RD2 — CAN2 receiver input.
I CAP2[0] — Capture input for Timer 2, channel 0.
P0[5]/I2SRX_WS/
LCDVD[1]/TD2/
CAP2[1] 166 [1] C12 [1] I/O P0[5] — General purpose digital input/output pin.
I/O I2SRX_WS — I 2 S Receive word select. It is driven by the master and
received by the slave. Corresponds to the signal WS in the I 2 S-bus
specification. [15]
O LCDVD[1] — LCD data. [15]
O TD2 — CAN2 transmitter output.
I CAP2[1] — Capture input for Timer 2, channel 1.
P0[6]/I2SRX_SDA/
LCDVD[8]/
SSEL1/MAT2[0] 164 [1] D13 [1] I/O P0[6] — General purpose digital input/output pin.
I/O I2SRX_SDA — I 2 S Receive data. It is driven by the transmitter and read
by the receiver. Corresponds to the signal SD in the I 2 S-bus
specification. [15]
O LCDVD[8] — LCD data. [15]
I/O SSEL1 — Slave Select for SSP1.
O MAT2[0] — Match output for Timer 2, channel 0.
P0[7]/I2STX_CLK/
LCDVD[9]/SCK1/
MAT2[1] 162 [1] C13 [1] I/O P0[7] — General purpose digital input/output pin.
I/O I2STX_CLK — I 2 S transmit clock. It is driven by the master and received
by the slave. Corresponds to the signal SCK in the I 2 S-bus
specification. [15]
O LCDVD[9] — LCD data. [15]
I/O SCK1 — Serial Clock for SSP1.
O MAT2[1] — Match output for Timer 2, channel 1.
P0[8]/I2STX_WS/
LCDVD[16]/
MISO1/MAT2[2] 160 [1] A15 [1] I/O P0[8] — General purpose digital input/output pin.
I/O I2STX_WS — I 2 S Transmit word select. It is driven by the master and
received by the slave. Corresponds to the signal WS in the I 2 S-bus
specification. [15]
O LCDVD[16] — LCD data. [15]
I/O MISO1 — Master In Slave Out for SSP1.
O MAT2[2] — Match output for Timer 2, channel 2.
P0[9]/I2STX_SDA/
LCDVD[17]/
MOSI1/MAT2[3] 158 [1] C14 [1] I/O P0[9] — General purpose digital input/output pin.
I/O I2STX_SDA — I 2 S transmit data. It is driven by the transmitter and read
by the receiver. Corresponds to the signal SD in the I 2 S-bus
specification. [15]
O LCDVD[17] — LCD data. [15]
I/O MOSI1 — Master Out Slave In for SSP1.
O MAT2[3] — Match output for Timer 2, channel 3.
Table 124. LPC2470/78 pin description …continued
Symbol Pin Ball Type Description