NXP Semiconductors LPC24XX UM10237 - Manual (Page 128)

UM10237_4 © NXP B.V. 2009. All rights reserved.
User manual Rev. 04 — 26 August 2009 128 of 792
NXP Semiconductors
UM10237
Chapter 8: LPC24XX Pin configuration
P1[3]/
ENET_TXD3/
MCICMD/
PWM0[2] A9 [1] I/O P1[3] — General purpose digital input/output pin.
O ENET_TXD3 — Ethernet transmit data 3 (MII interface).
I/O MCICMD — Command line for SD/MMC interface.
O PWM0[2] — Pulse Width Modulator 0, output 2.
P1[4]/
ENET_TX_EN C6 [1] I/O P1[4] — General purpose digital input/output pin.
O ENET_TX_EN — Ethernet transmit data enable (RMII/MII interface).
P1[5]/
ENET_TX_ER/
MCIPWR/
PWM0[3] B13 [1] I/O P1[5] — General purpose digital input/output pin.
O ENET_TX_ER — Ethernet Transmit Error (MII interface).
O MCIPWR — Power Supply Enable for external SD/MMC power supply.
O PWM0[3] — Pulse Width Modulator 0, output 3.
P1[6]/
ENET_TX_CLK/
MCIDAT0/
PWM0[4] B10 [1] I/O P1[6] — General purpose digital input/output pin.
I ENET_TX_CLK — Ethernet Transmit Clock (MII interface).
I/O MCIDAT0 — Data line 0 for SD/MMC interface.
O PWM0[4] — Pulse Width Modulator 0, output 4.
P1[7]/
ENET_COL/
MCIDAT1/
PWM0[5] C13 [1] I/O P1[7] — General purpose digital input/output pin.
I ENET_COL — Ethernet Collision detect (MII interface).
I/O MCIDAT1 — Data line 1 for SD/MMC interface.
O PWM0[5] — Pulse Width Modulator 0, output 5.
P1[8]/
ENET_CRS_DV/
ENET_CRS B6 [1] I/O P1[8] — General purpose digital input/output pin.
I ENET_CRS_DV/ENET_CRS — Ethernet Carrier Sense/Data Valid (RMII
interface)/ Ethernet Carrier Sense (MII interface).
P1[9]/
ENET_RXD0 D7 [1] I/O P1[9] — General purpose digital input/output pin.
I ENET_RXD0 — Ethernet receive data 0 (RMII/MII interface).
P1[10]/
ENET_RXD1 A7 [1] I/O P1[10] — General purpose digital input/output pin.
I ENET_RXD1 — Ethernet receive data 1 (RMII/MII interface).
P1[11]/
ENET_RXD2/
MCIDAT2/
PWM0[6] A12 [1] I/O P1[11] — General purpose digital input/output pin.
I ENET_RXD2 — Ethernet Receive Data 2 (MII interface).
I/O MCIDAT2 — Data line 2 for SD/MMC interface.
O PWM0[6] — Pulse Width Modulator 0, output 6.
P1[12]/
ENET_RXD3/
MCIDAT3/
PCAP0[0] A14 [1] I/O P1[12] — General purpose digital input/output pin.
I ENET_RXD3 — Ethernet Receive Data (MII interface).
I/O MCIDAT3 — Data line 3 for SD/MMC interface.
I PCAP0[0] — Capture input for PWM0, channel 0.
P1[13]/
ENET_RX_DV D14 [1] I/O P1[13] — General purpose digital input/output pin.
I ENET_RX_DV — Ethernet Receive Data Valid (MII interface).
P1[14]/
ENET_RX_ER D8 [1] I/O P1[14] — General purpose digital input/output pin.
I ENET_RX_ER — Ethernet receive error (RMII/MII interface).
P1[15]/
ENET_REF_CLK/
ENET_RX_CLK A8 [1] I/O P1[15] — General purpose digital input/output pin.
I ENET_REF_CLK/ENET_RX_CLK — Ethernet Reference Clock (RMII interface)/
Ethernet Receive Clock (MII interface).
Table 120. Pin description …continued
Symbol Ball Type Description