Nxp semiconductors – NXP Semiconductors LPC24XX UM10237 User Manual
Page 176
UM10237_4
© NXP B.V. 2009. All rights reserved.
User manual
Rev. 04 — 26 August 2009
176 of 792
NXP Semiconductors
UM10237
Chapter 8: LPC24XX Pin configuration
in the EMCControl register during POR, see
. Therefore, the user code
residing in the external boot memory must be linked to execute from address location
0x8000 0000 (EMC bank 0 address).
Remark: The external boot option is supported only for flashless devices LPC2420,
LPC2460, and LPC2470.