Nxp semiconductors – NXP Semiconductors LPC24XX UM10237 User Manual
Page 315
UM10237_4
© NXP B.V. 2009. All rights reserved.
User manual
Rev. 04 — 26 August 2009
315 of 792
NXP Semiconductors
UM10237
Chapter 12: LPC24XX LCD controller
7.11 Masked Interrupt Status register (LCD_INTSTAT, RW - 0xFFE1 0024)
The LCD_INTSTAT register is Read-Only, and contains a bit-by-bit logical AND of the
LCD_INTRAW register and the LCD_INTMASK register. A logical OR of all interrupts is
provided to the system interrupt controller.
The contents of LCD_INTSTAT register are described in
.
7.12 Interrupt Clear register (LCD_INTCLR, RW - 0xFFE1 0028)
The LCD_INTCLR register is Write-Only. Writing a logic 1 to the relevant bit clears the
corresponding interrupt.
The contents of the LCD_INTCLR register are described in
Table 270. Masked Interrupt Status register (LCD_INTSTAT, RW - 0xFFE1 0024)
Bits
Function
Description
Reset
value
31:5
reserved
Reserved, user software should not write ones to reserved bits.
The value read from a reserved bit is not defined.
-
4
BERMIS
AHB master bus error masked interrupt status.
Set when the both the BERRAW bit in the LCD_INTRAW
register and the BERIM bit in the LCD_INTMSK register are set.
0x0
3
VCompMIS
Vertical compare masked interrupt status.
Set when the both the VCompRIS bit in the LCD_INTRAW
register and the VCompIM bit in the LCD_INTMSK register are
set.
0x0
2
LNBUMIS
LCD next address base update masked interrupt status.
Set when the both the LNBURIS bit in the LCD_INTRAW
register and the LNBUIM bit in the LCD_INTMSK register are
set.
0x0
1
FUFMIS
FIFO underflow masked interrupt status.
Set when the both the FUFRIS bit in the LCD_INTRAW register
and the FUFIM bit in the LCD_INTMSK register are set.
0x0
0
reserved
Reserved, user software should not write ones to reserved bits.
The value read from a reserved bit is not defined.
-
Table 271. Interrupt Clear register (LCD_INTCLR, RW - 0xFFE1 0028)
Bits
Function
Description
Reset
value
31:5
reserved
Reserved, user software should not write ones to reserved bits.
The value read from a reserved bit is not defined.
-
4
BERIC
AHB master error interrupt clear.
Writing a 1 to this bit clears the AHB master error interrupt.
0x0
3
VCompIC
Vertical compare interrupt clear.
Writing a 1 to this bit clears the vertical compare interrupt.
0x0