H3C Technologies H3C SecPath F1000-E - Manual (Page 950)

925
• If you configure the same type of apply clauses that set different values (including the apply
community and apply extcommunity clauses with the additive keyword) on nodes that are
combined by the continue clause, the apply clause configured on the last matching node takes
effect.
• If you configure the apply community clause for multiple nodes that are combined by the continue
clause, the apply comm-list delete clause configured on the current node cannot delete the
community attributes of preceding nodes.
To define a continue clause:
Step Command Remarks
1. Enter system view. system-view N/A
2. Create a routing policy and
enter routing policy view. route-policy route-policy-name
{ deny | permit } node node-number Not created by default.
3. Specify the next routing policy
node to be matched.
continue [ node-number ]
Optional.
Not configured by default.
The node number specified must
be larger than the current node
number.
Displaying and maintaining the routing policy
Task Command Remarks
Display BGP AS-PATH list
information. display ip as-path [ as-path-number ] [ | { begin |
exclude | include } regular-expression ] Available in any
view
Display BGP community list
information.
display ip community-list
[ basic-community-list-number |
adv-community-list-number | comm-list-name ] [ |
{ begin | exclude | include } regular-expression ]
Available in any
view
Display IPv4 prefix list statistics.
display ip ip-prefix [ ip-prefix-name ] [ | { begin |
exclude | include } regular-expression ] Available in any
view
Display IPv6 prefix list statistics.
display ip ipv6-prefix [ ipv6-prefix-name ] [ |
{ begin | exclude | include } regular-expression ] Available in any
view
Display routing policy information.
display route-policy [ route-policy-name ] [ | { begin
| exclude | include } regular-expression ]
Available in any
view
Clear IPv4 prefix list statistics. reset ip ip-prefix [ ip-prefix-name ]
Available in user
view
Clear IPv6 prefix list statistics. reset ip ipv6-prefix [ ipv6-prefix-name ]
Available in user
view