H3C Technologies H3C SecPath F1000-E - Manual (Page 790)

765
Step Command Remarks
3. Apply an IPsec policy on the
interface. ospfv3 ipsec-policy policy-name [ instance
instance-id ]
Not configured by default.
To apply an IPsec policy on a virtual link:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter OSPFv3 view. ospfv3 [ process-id ] N/A
3. Enter OSPF area view. area area-id N/A
4. Apply an IPsec policy on a
virtual link.
vlink-peer router-id [ hello seconds |
retransmit seconds | trans-delay seconds
| dead seconds | instance instance-id |
ipsec-policy policy-name ] *
Not configured by default.
Displaying and maintaining OSPFv3
Task Command Remarks
Display OSPFv3 process brief
information. display ospfv3 [ process-id ] [ | { begin | exclude |
include } regular-expression ] Available in
any view
Display OSPFv3 interface
information.
display ospfv3 interface [ interface-type
interface-number | statistic ] [ | { begin | exclude |
include } regular-expression ]
Available in
any view
Display OSPFv3 LSDB information.
display ospfv3 [ process-id ] lsdb [ [ external |
inter-prefix | inter-router | intra-prefix | link | network
| router ] [ link-state-id ] [ originate-router router-id ] |
total ] [ | { begin | exclude | include }
regular-expression ]
Available in
any view
Display OSPFv3 LSDB statistics.
display ospfv3 lsdb statistic [ | { begin | exclude |
include } regular-expression ] Available in
any view
Display OSPFv3 neighbor
information.
display ospfv3 [ process-id ] [ area area-id ] peer
[ [ interface-type interface-number ] [ verbose ] |
peer-router-id ] [ | { begin | exclude | include }
regular-expression ]
Available in
any view
Display OSPFv3 neighbor statistics.
display ospfv3 peer statistic [ | { begin | exclude |
include } regular-expression ] Available in
any view
Display OSPFv3 routing table
information.
display ospfv3 [ process-id ] routing [ ipv6-address
prefix-length | ipv6-address/prefix-length | abr-routes
| asbr-routes | all | statistics ] [ | { begin | exclude |
include } regular-expression ]
Available in
any view
Display OSPFv3 area topology
information. display ospfv3 [ process-id ] topology [ area area-id ] [ |
{ begin | exclude | include } regular-expression ] Available in
any view
Display OSPFv3 virtual link
information. display ospfv3 [ process-id ] vlink [ | { begin | exclude
| include } regular-expression ] Available in
any view