H3C Technologies H3C SecPath F1000-E - Manual (Page 95)

70
Configuring an MST region
Select Network > MSTP > Region from the navigation tree to enter the page as shown in Figure 44 .
Figure 44 MSTP region
Click Modify to enter the MSTP Region Configuration page, as shown in Figure 45 .
Figure 45 Modifying an MSTP region
Table 16 Configuration items
Item Description
Region Name
MST region name.
The MST region name is the bridge MAC address of the device by default.
Revision Level Revision level of the MST region.
Manual
Instance ID ID of the MSTI to be configured.
VLAN ID VLAN IDs to be mapped to the MSTI.
Apply Add the VLAN-to-MSTI mappings to the VLAN-to-MSTI mapping table.
Modulo
Set the modulo value based on which 4094 VLANs are mapped to the
corresponding MSTIs.