H3C Technologies H3C SecPath F1000-E - Manual (Page 609)

584
Configuring IGMP at the CLI
Task Remarks
Configuring basic IGMP functions
Enabling IGMP Optional
Configuring IGMP versions Optional
Configuring static joining Optional
Configuring a multicast group filter Optional
Setting the maximum number of multicast
groups that an interface can join
Optional
Adjusting IGMP performance
Configuring Router-Alert option of IGMP
messages
Optional
Configuring IGMP query and response
parameters
Optional
Configuring IGMP fast leave processing Optional
Enabling the IGMP host tracking function Optional
Configuring IGMP SSM mapping
Enabling SSM mapping Optional
Configuring SSM mappings Optional
Configuring IGMP proxying
Enabling IGMP proxying Optional
Configuring multicast forwarding on a
downstream interface
Optional
NOTE:
•
In IGMP view, the configuration is effective on all interfaces. In interface view, the configuration is
effective on only the current interface.
• If a feature is not configured on an interface in interface view, the global configuration in IGMP view will
apply to that interface. If a feature is configured in both IGMP view and interface view, the configuration
in interface view will be given priority.
Configuring basic IGMP functions
Configuration prerequisites
Before you configure the basic functions of IGMP, complete the following tasks:
• Configure any unicast routing protocol so that all devices in the domain are interoperable at the
network layer.
• Configure PIM-DM or PIM-SM.
• Determine the IGMP version.
• Determine the multicast group and multicast source addresses for static group member
configuration.
• Determine the ACL rule for multicast group filtering.
• Determine the maximum number of multicast groups that an interface can join.