Dhcp relay agent – H3C Technologies H3C SecPath F1000-E User Manual
Page 213
188
Task Remarks
Configuring and displaying
clients' IP-to-MAC bindings
Optional.
Create a static IP-to-MAC binding, and view static and dynamic bindings.
The DHCP relay agent can dynamically record clients' IP-to-MAC bindings
after clients get IP addresses. It also supports static bindings, that is, you can
manually configure IP-to-MAC bindings on the DHCP relay agent, so that
users can access external network using fixed IP addresses.
By default, no static binding is created.
Enabling DHCP and configuring advanced parameters for the
DHCP relay agent
Select Network > DHCP > DHCP Relay from the navigation tree to enter the page shown in
Enable or disable DHCP in the DHCP Service field. Click Display Advanced Configuration to expand the
advanced DHCP relay agent configuration field.
- H3C SecPath F5000-A5 Firewall H3C SecPath F1000-A-EI H3C SecPath F1000-E-SI H3C SecPath F1000-S-AI H3C SecPath F5000-S Firewall H3C SecPath F5000-C Firewall H3C SecPath F100-C-SI H3C SecPath F1000-C-SI H3C SecPath F100-A-SI H3C SecBlade FW Cards H3C SecBlade FW Enhanced Cards H3C SecPath U200-A U200-M U200-S H3C SecPath U200-CA U200-CM U200-CS H3C SecBlade LB Cards H3C SecPath L1000-A Load Balancer