H3C Technologies H3C SecPath F1000-E - Manual (Page 454)

429
[SecPathA-ospf-1] quit
# Configure Router A.
system-view
[RouterA] router id 2.2.2.2
[RouterA] ospf
[RouterA-ospf-1] area 0
[RouterA-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255
[RouterA-ospf-1-area-0.0.0.0] quit
[RouterA-ospf-1] quit
# Configure SecPath B.
system-view
[SecPathB] router id 3.3.3.3
[SecPathB] ospf
[SecPathB-ospf-1] area 0
[SecPathB-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255
[SecPathB-ospf-1-area-0.0.0.0] quit
[SecPathB-ospf-1] quit
# Configure Router B.
system-view
[RouterB] router id 4.4.4.4
[RouterB] ospf
[RouterB-ospf-1] area 0
[RouterB-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255
[RouterB-ospf-1-area-0.0.0.0] quit
[RouterB-ospf-1] return
# Display neighbor information on SecPath A.
[SecPathA] display ospf peer verbose
OSPF Process 1 with Router ID 1.1.1.1
Neighbors
Area 0.0.0.0 interface 192.168.1.1(GigabitEthernet0/1)'s neighbors
Router ID: 2.2.2.2 Address: 192.168.1.2 GR State: Normal
State: 2-Way Mode: None Priority: 1
DR: 192.168.1.4 BDR: 192.168.1.3 MTU: 0
Dead timer due in 38 sec
Neighbor is up for 00:01:31
Authentication Sequence: [ 0 ]
Router ID: 3.3.3.3 Address: 192.168.1.3 GR State: Normal
State: Full Mode: Nbr is Master Priority: 1
DR: 192.168.1.4 BDR: 192.168.1.3 MTU: 0
Dead timer due in 31 sec
Neighbor is up for 00:01:28
Authentication Sequence: [ 0 ]
Router ID: 4.4.4.4 Address: 192.168.1.4 GR State: Normal
State: Full Mode: Nbr is Master Priority: 1