H3C Technologies H3C SecPath F1000-E User Manual
Page 59
34
•
Select Network > VLAN > Port from the navigation tree, click the
icon for port GigabitEthernet
0/1 in the Operation column, and then make the following configurations, as shown in
Figure 23 Configuring the PVID of GigabitEthernet 0/1.
•
Select the Untagged option for Member Type.
•
Enter VLAN ID 100.
•
Click Apply.
# Configure GigabitEthernet 0/1 as a hybrid port and assign it to VLAN 2 and VLANs 6 through 50 as
an untagged member.
•
Click the
icon for GigabitEthernet 0/1 in the Operation column and make the following
configurations, as shown in
.
Figure 24 Assigning GigabitEthernet 0/1 to VLAN 2 and VLANs 6 through 50 as an untagged member
•
Select the Untagged option for Member Type.
•
Enter VLAN IDs 2, 6-50.
•
Click Apply. A dialog box appears telling you that the access port will be changed into a hybrid
port.
•
Click OK in the dialog box.
# Assign GigabitEthernet 0/1 to VLAN 100 as a tagged member.
•
Select Network > VLAN > VLAN from the navigation tree.
•
Enter 100 in the VLAN Range field.
- H3C SecPath F5000-A5 Firewall H3C SecPath F1000-A-EI H3C SecPath F1000-E-SI H3C SecPath F1000-S-AI H3C SecPath F5000-S Firewall H3C SecPath F5000-C Firewall H3C SecPath F100-C-SI H3C SecPath F1000-C-SI H3C SecPath F100-A-SI H3C SecBlade FW Cards H3C SecBlade FW Enhanced Cards H3C SecPath U200-A U200-M U200-S H3C SecPath U200-CA U200-CM U200-CS H3C SecBlade LB Cards H3C SecPath L1000-A Load Balancer